Relay
1. FAN NO. 1 RELAY
(a) Remove the relay from the engine room relay block. |
 |
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
|---|---|---|
3 - 5 |
Battery voltage is not applied between terminals 1 and 2 |
10 kΩ or higher |
3 - 5 |
Battery voltage is applied between terminals 1 and 2 |
Below 1 Ω |
- If the result is not as specified, replace the relay.
(c) Install the relay to the engine room relay block.
2. FAN NO. 2 RELAY
(a) Remove the relay from the engine room relay block. |
 |
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
|---|---|---|
3 - 4 |
Battery voltage is not applied between terminals 1 and 2 |
Below 1 Ω |
3 - 5 |
Battery voltage is not applied between terminals 1 and 2 |
10 kΩ or higher |
3 - 4 |
Battery voltage is applied between terminals 1 and 2 |
10 kΩ or higher |
3 - 5 |
Battery voltage is applied between terminals 1 and 2 |
Below 1 Ω |
- If the result is not as specified, replace the relay.
(c) Install the relay.
3. FAN NO. 3 RELAY
(a) Remove the relay from the engine room relay block. |
 |
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
|---|---|---|
3 - 5 |
Battery voltage is not applied between terminals 1 and 2 |
10 kΩ or higher |
3 - 5 |
Battery voltage is applied between terminals 1 and 2 |
Below 1 Ω |
- If the result is not as specified, replace the relay.
(c) Install the relay.
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.