Installation

1. INSTALL WATER PUMP ASSEMBLY

(a) Install a new gasket and the water pump with the 7 bolts. Torque: 21 N·m {214 kgf·cm, 15 ft·lbf}

2. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

3. INSTALL GENERATOR ASSEMBLY

4. INSTALL WIRE HARNESS CLAMP BRACKET

5. INSTALL V-RIBBED BELT

HINT:

See page

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

7. ADD ENGINE COOLANT

8. INSPECT FOR COOLANT LEAK

9. INSTALL COOL AIR INTAKE DUCT SEAL

10. INSTALL NO. 1 ENGINE UNDER COVER

11. INSTALL NO. 2 ENGINE UNDER COVER

12. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY