Reassembly

1. INSTALL NO. 1 REAR BUMPER REINFORCEMENT

(a) Install the No. 1 rear bumper reinforcement with the 6 nuts. Torque: 68 N·m {693 kgf·cm, 50 ft·lbf}

2. INSTALL REAR BUMPER ENERGY ABSORBER

(a) Engage the 2 guides to install the rear bumper energy absorber.

3. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH

(a) Engage the 2 claws and install the No. 2 rear bumper side support LH.

(b) Install the screw.

4. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure for the RH side and LH side.

5. INSTALL REAR BUMPER SIDE RETAINER LH

(a) Engage the 2 claws and install the rear bumper side retainer LH.

(b) Install the screw.

6. INSTALL REAR BUMPER SIDE RETAINER RH

HINT:

Use the same procedure for the RH side and LH side.

7. INSTALL REAR BUMPER SPOILER LH (for 1AR-FE)

(a) Install the rear bumper spoiler LH with the screw. Text in Illustration *1 Outside Moulding Retainer

(b) Install the clip and outside moulding retainer.

8. INSTALL REFLEX REFLECTOR ASSEMBLY LH

(a) Engage the guide.

(b) Install the reflex reflector assembly LH with the screw.

9. INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT:

Use the same procedure for the RH side and LH side.

10. INSTALL REAR BUMPER WIRE (w/ Intuitive Parking Assist System)

11. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)

12. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

13. INSTALL ULTRASONIC SENSOR CLIP (w/ Intuitive Parking Assist System)