Receiver Error (C2176/76)

The signals are transmitted to the tire pressure warning antenna and receiver on the body as radio waves and then sent to the tire pressure warning ECU.

NOTICE:

• When replacing the tire pressure warning ECU, read the transmitter IDs stored in the old ECU using the Techstream and write them down before removal.
• It is necessary to perform registration (See page ) of the transmitter IDs into the tire
  pressure warning ECU if the ECU has been replaced.

1. CHECK DTC OUTPUT (C2176/76)

(a) Clear the DTC (See page ).

(b) Turn the ignition switch off.

(c) Turn the ignition switch to ON and check for DTC (See page ).

OK:

DTC C2176/76 is not output.

OK

END

NG

REPLACE TIRE PRESSURE WARNING ECU