Seat Memory Switch

1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL

3. REMOVE COURTESY LIGHT ASSEMBLY

4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

5. REMOVE SEAT MEMORY SWITCH

(a) Disengage the 4 claws and remove the seat memory switch from the front door trim board sub-assembly LH.

1. INSPECT SEAT MEMORY SWITCH

(a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 SET switch is pressed Below 1 Ω SET switch is not pressed 10 kΩ or higher 1 - 4 M1 switch is pressed Below 1 Ω M1 switch is not pressed 10 kΩ or higher 1 - 3 M2 switch is pressed Below 1 Ω M2 switch is not pressed 10 kΩ or higher Text in Illustration *1 M1 Switch *2 M2 Switch *3 SET Switch *a Component without harness connected (Seat Memory Switch) If the result is not as specified, replace the seat memory switch.

1. INSTALL SEAT MEMORY SWITCH

(a) Engage the 4 claws to install the seat memory switch to the front door trim board sub-assembly LH.

2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

3. INSTALL COURTESY LIGHT ASSEMBLY

4. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL

5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH