Assembly overview - brake caliper (PC57 brakes)

When carrying out repairs, install all parts supplied in repair kit.

Use only methylated spirits for cleaning the brake.

Apply thin coat of assembly paste G 052 150 A2 to brake cylinder, piston and sealing ring.

1 -

Dust cap

Fit onto bleeder valve.

2 -	Bleeder valve

Apply thin coat of assembly paste G 052 150 A2 to thread before screwing in.

10 N·m

3 -	Hexagon bolt

Renew after removing.

35 N·m

4 -

Guide pin

5 -	Protective cap

Insert into brake carrier and guide pin groove; grease groove beforehand, use repair kit grease pack.

6 -	Brake carrier

Supplied as preassembled replacement part with greased guide pins and protective caps. If protective caps or guide pins are damaged, install repair kit. Use lubricant sachet supplied to lubricate guide pins.

7 -	Protective cap

Removing and installing → Chapter

When inserting piston, take care not to damage it.

8 -

Piston

Removing and installing → Chapter

Apply thin coat of assembly paste G 052 150 A2 to piston before installing.

9 -	Sealing ring

Removing and installing → Chapter

10 -	Brake caliper