Assembly overview - electronically controlled damping system, multi-link suspension, saloon

1 -	Front right vehicle lever sender -G289-

Removing and installing → Chapter

2 -	Front right body acceleration sender -G342-

Removing and installing → Chapter

3 -	Rear left body acceleration sender -G699-

Location: on left suspension strut dome behind left luggage compartment side trim.

Removing and installing → Chapter

4 -	Electronically controlled damping control unit -J250-

Removing and installing → Chapter

Location: electronically controlled damping control unit -J250- is installed behind left luggage compartment side trim. Function Replace control unit must be performed with → Vehicle diagnostic tester if electronically controlled damping control unit -J250- is renewed. If the reference position has been re-adapted, the front camera for driver assist systems must be recalibrated on vehicles with lane departure warning function → Chapter „Calibrating front camera for driver assist systems“.

5 -	Rear left vehicle level sender -G76-

Removing and installing, front-wheel drive → Chapter

Removing and installing, four-wheel drive → Chapter

6 -	Front left body acceleration sender -G341-

Removing and installing → Chapter

7 -	Front left vehicle level sender -G78-

Removing and installing → Chapter

8 -	Shock absorber with front right shock absorber damper adjustment valve -N337-

Removing and installing suspension strut → Chapter.

Repairing suspension strut → Chapter.

9 -	Shock absorber with rear right shock absorber damper adjustment valve -N339-.

Removing and installing shock absorber → Chapter.

Repairing shock absorber → Chapter.

10 -	Shock absorber with rear left shock absorber damper adjustment valve -N338-.

Removing and installing shock absorber → Chapter.

Repairing shock absorber → Chapter.

11 -	Shock absorber with front left shock absorber damper adjustment valve -N336-

Removing and installing suspension strut → Chapter.

Repairing suspension strut → Chapter.