4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Assembly overview - radiator and radiator fan

~1min read
Assembly overview - radiator and radiator fan
1 - Radiator

Removing and installing → Chapter

Change coolant after renewing.

2 - Coolant hose

Pull out retaining clip to remove.

Connecting → Fig.

3 - Retaining clip
4 - O-ring

Renew

5 - Radiator outlet coolant temperature sender -G83-

Removing and installing → Chapter

6 - O-ring

Renew

7 - Coolant hose

Pull out retaining clip to remove.

Connecting → Fig.

8 - O-ring

Renew

9 - Coolant hose

Pull out retaining clip to remove.

Connecting → Fig.

10 - Air duct

Not fitted on all vehicles

11 - Air duct
12 - Rubber bush

For radiator

13 - Radiator for charge air cooling circuit

Removing and installing → Chapter „Removing and installing radiator“

14 - Condenser

Removing and installing → Heating, air conditioning; Rep. gr.87.

15 - Rubber bush

For radiator

16 - O-ring

Renew

17 - Coolant hose

Pull out retaining clip to remove.

Connecting → Fig.

18 - O-ring

Renew


Connecting coolant hose with plug-in connector to radiator

  • Remove old O-ring -2- in coolant hose -3-.
  • Moisten new O-ring with coolant and insert into coolant hose.
  • Push coolant hose into connection -1- until it audibly engages.
  • Press again on coolant hose and check plug-in connector is engaged correctly by pulling hose back.
Assembly overview - radiator and radiator fan

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.