Assembly overview - rear brake caliper

When carrying out repairs, install all parts supplied in repair kit. Use only methylated spirits for cleaning the brake. New brake calipers are filled with brake fluid and are pre-bled.

1 -	Brake caliper

2 -	Damper bushes

3 -

Guide pin

4 -	Cover caps

5 -	Hexagon socket head bolt

8 N·m

6 -	Parking brake motor

7 -	Sealing ring

Renew

8 -	Thrust nut

Removing and installing not possible

The compressor nut must not be unscrewed too far, since otherwise the ball screw will be damaged.

9 -	Sealing ring

Removing and installing not possible

10 -

Piston

Removing and installing not possible

The piston must not be unscrewed too far, otherwise the ball screw will be damaged.

11 -	Protective cap

Removing and installing → Chapter

Note The brake caliper does not need to be removed in order to renew the protective cap; do not unbolt the break hose.

12 -	Bleeder valve

Apply thin coat of assembly paste G 052 150 A2 to thread before screwing in.

10 N·m

13 -

Dust cap