Assembly overview - standard wheel

1 -

Wheel

Fitting wheels → Chapter

2 -	Wheel bolts

Different versions → Chapter

3 -

Tyres

→ Chapter „Information on tyres“

4 -	Valve/tyre pressure sensor

Always renew valve

Use only correct valves as specified in → Electronic Parts Catalogue “ETKA”

→ Chapter „Tyre pressure sensor“

5 -

Rim

Observe fitting instructions → Chapter

→ Chapter „Information on wheel rims“

→ Chapter „Structure of wheel rim“

6 -	Adhesive balancing weights

Not more than 60 g permitted per wheel rim flange

Remove dirt and grease from wheel rim at bonding point

Pull off backing foil

Bond on balancing weights at surfaces provided for this purpose

7 -	Anti-theft wheel bolt

Observe the fitting instructions → Chapter

Handling → Fig.

8 -	Adapter for anti-theft wheel bolt

Fit onto wheel bolt → Fig.

9 -	Cap for anti-theft wheel bolts

10 -	Caps for wheel bolts

11 -	Wheel bolts

Specified torque: → Running gear, axles, steering; Rep. gr.44

Note Make sure the correct wheel bolts are fitted → Electronic Parts Catalogue “ETKA”

Observe fitting instructions → Chapter

12 -	Wheel hub cover

Removing and installing → Chapter