Assembly overview - wheel, PAX

1 -

Wheel

Fitting wheels → Chapter

2 -	Wheel bolts

Different versions → Chapter

3 -

PAX tyre

Identification markings on the tyre sidewall → Chapter

4 -	Support ring

5 -	Wheel for PAX tyres

Observe fitting instructions → Chapter

6 -	Metal valve body

Use only correct valves as specified in → ETKA

Supplied as complete unit

7 -	Wheel electronics

Renew batteries as a complete unit

Remaining service life, temperature and inflation pressure can be read out via diagnosis function with vehicle diagnostic, testing and information system -VAS 5051-

Beru tyre pressure sensor system → Chapter

Siemens tyre pressure sensor system → Chapter

8 -	Adhesive balancing weights

Not more than 60 g per wheel permitted

Remove dirt and grease from wheel rim at bonding point

Pull off backing foil

Bond on balancing weights at surfaces provided for this purpose

9 -	Anti-theft wheel bolt

Observe fitting instructions → Chapter

Handling → Fig.

10 -	Adapter for anti-theft wheel bolt

Fit onto wheel bolt → Fig.

11 -	Cap for anti-theft wheel bolts

12 -	Caps for wheel bolts

13 -	Wheel bolts

Note Make sure the correct wheel bolts are fitted → Electronic Parts Catalogue “ETKA”

Observe fitting instructions → Chapter

14 -	Wheel hub cover

Removing and installing → Chapter