Brake system (hybrid)
Bleeding hydraulic system following standard procedure
Note Bleeding the hydraulic system using brake filling and bleeding equipment -VAS 5234- is described. A pre-pressure of 2 bar is required for bleeding the ABS hydraulic unit -N55-.
Special tools and workshop equipment required |
|
|
Brake filling and bleeding equipment -VAS 5234- |
|
 |
Tool set for brake bleeding -VAS 6564-
Carry out the following work:
- On vehicles with 15-inch rims, remove rear wheels.
Note
Adhere strictly to work sequence when bleeding brake system.
- Connect brake filling and bleeding equipment -VAS 5234-.
- Open bleeder valves in specified order and bleed brake calipers.
| 1 - |
Front left brake caliper |
| 2 - |
Front right brake caliper |
| 3 - |
Rear left wheel brake cylinder |
| 4 - |
Rear right wheel brake cylinder |
| 5 - |
Brake system pressure accumulator -VX70-, LHD vehicles |
Use suitable bleeder hose. It must sit tightly on bleeder valve so that no air can enter brake system: - Leave bleeder valve of each brake caliper open with bleeder hose fitted until brake fluid discharges free of air bubbles.
|
|
 |
?
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?