Volkswagen Golf Quiz
Brake system (hybrid)

Testing for leaks

In this manual: Brake system (hybrid)
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Special tools and workshop equipment required

Tester for brake pressure regulator -V.A.G 1310 A-

Adapter M10 -V.A.G 1310/6-

Test prerequisites:

Brake system (hydraulic unit, brake hoses, brake lines and brake calipers) operating properly and free of leaks.

Carry out the following work:

Checking

  • Remove bleeder valve at one of front brake calipers.
  • Connect pressure gauge -V.A.G 1310 A- and bleed.
  • Apply pressure to brake pedal until gauge indicates a pressure of 50 bar. The pressure must not drop by more than 4 bar within the test period of 45 seconds. Renew brake master cylinder if drop in pressure exceeds specification.
Testing for leaksW00-11596

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.