Guide for using trailers
Factory fitted towing attachment
In this manual: Guide for using trailers
~1min read
| If the vehicle was supplied with a factory fitted towing attachment, everything with regards to the technical and legal requirements has already been taken care of. It should be noted that from the start of 1988 a »13-pin« trailer socket is installed in place of the conventional »7-pin« socket. This new socket allows connection at a later time of additional electrical consumers from the trailer, for which there was no means of connection in the previous socket, e.g. a reversing light. If the trailer to be towed has a »7-pin« connector, an adapter cable available from Volkswagen dealerships can be used. |
Retrofitted towing attachment
| If the vehicle is to be equipped with a retrofit towing attachment, the following should be observed: The towing attachment is a safety element. Therefore, only a type approved device designed specifically for the vehicle should be used. It is recommended that a towing attachment from the Volkswagen accessory programme is used as it is the same as the factory fitted devices. For these towing attachments, the installation instructions supplied also have Volkswagen's approval. |
Ball head
Height:350 to 420 mm, measured from centre of ball head to road surfaceDistance:Minimum of 65 mm, measured from centre of ball head to bumper |
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?