Electrical system

Overview of fitting locations – adaptive cruise control, variant 1

~1min read
0102030405086N·mlb·ft
Tightening torque found on this page
Overview of fitting locations – adaptive cruise control, variant 1
1 - Trim for radar sensor
2 - Adaptive cruise control unit -J428-

Removing and installing → Chapter

Calibrating → Chapter

3 - Bolt

Qty. 2

Specified torque: 8 N·m

4 - Adaptive cruise control button -E357-

Integrated in multifunction steering wheel

Removing and installing → Communication; Rep. gr.91.

5 - Dash panel insert -KX2-

With control unit in dash panel insert -J285-.

Removing and installing → Chapter

6 - Front bumper carrier
7 - Quick-release fastener

Qty. 3

Renew

8 - Retaining plate

Removing and installing → Chapter

9 - Adjustment screw

Serves as a pivot

If adjustment is completed, stud setting must not be changed anymore.

Measure adjustment and adjust if necessary → Anchor

10 - Adjustment screw

For adjusting adaptive cruise control unit -J428-

Qty. 2

Measure adjustment and adjust if necessary → Anchor

11 - Fastener

Must always be renewed if studs → Item and → Item were unscrewed.

Renewing → Anchor

12 - Electrical connector

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.