General body repairs, exterior
Overview of fitting locations – central locking
In this manual: General body repairs, exterior
~2min read

| 1 - | Coupling station |
- Fitting location: right A-pillar
- To separate connections, release bellows at pillar
| 2 - | Onboard supply control unit -J519- |
- Location: Under dash panel on driver side
- Removing → Electrical system; Rep. gr.97
| 3 - | Front passenger door control unit -J387- |
- Installed in door separated from window regulator motor.
| 4 - | Front right door lock |
- Door lock is secured to inner part of door
- Electric central locking is integrated into door lock
- Removing → Chapter
| 5 - | Coupling station |
- Fitting location: right B-pillar.
- To separate connections, release bellows at pillar
| 6 - | Driver door control unit -J386- |
- Installed in door separated from window regulator motor
| 7 - | Rear right door lock |
- Door lock is secured to inner part of door
- Electric central locking is integrated into door lock
- Removing → Chapter
| 8 - | Coupling station, right side of rear lid |
- Location: behind C-pillar trim
- Remove and install → General body repairs, interior; Rep. gr.70.
| 9 - | Release element with button |
- Location: Bolted to rear lid.
- Removing → Chapter
| 10 - | Rear lid lock |
- Location: bolted to rear lid
- Removing → Chapter
| 11 - | Coupling station, left side of rear lid |
- Location: behind C-pillar trim
- Remove and install → General body repairs, interior; Rep. gr.70
| 12 - | Rear left door lock |
- Door lock is secured to inner part of door
- Electric central locking is integrated into door lock
- Removing → Chapter
| 13 - | Rear left door control unit -J388- |
- Installed in door separated from window regulator motor
| 14 - | Coupling station |
- Location: left B-pillar
- To separate connections, release bellows at pillar.
| 15 - | Front left door lock |
- Door lock is secured to inner part of door
- Electric central locking is integrated into door lock
- Removing → Chapter
| 16 - | Driver door control unit -J386- |
- Installed in door separated from window regulator motor.
| 17 - | Central switch for window regulators |
- Location: installed in door panel
- Remove and install central switch for window regulator → Electrical system; Rep. gr.96
| 18 - | Button for central closing |
- Location: installed in door panel
- Remove and install button for central closing → Electrical system; Rep. gr.96.
| 19 - | Coupling station |
- Location: left A-pillar
- To separate connections, release bellows at pillar.
| 20 - | Alarm horn -H12- |
- Removing → Electrical system; Rep. gr.96.
| 21 - | Bonnet contact switch -F266- |
- Contact switch for anti-theft alarm
- Location: on bonnet lock
- Removing → Chapter
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?