General body repairs, exterior

Removing and installing ignition key battery

~1min read

Removing

  • Folding out key bit -1--arrow a-.
  • Use a small screwdriver -3- to raise the cover of battery compartment -2--arrow b-.
Removing and installing ignition key battery
  • Use a small screwdriver -3- to lift battery -1- out of battery compartment -2--arrow-.

Installing

Note
Before installing battery, always press any key once.
This resets the transmitter unit, so that it can now recognize a new battery.
Ensure correct polarity and mounting position when installing battery. The positive pole is marked.
Removing and installing ignition key battery
  • Insert battery -1- into battery compartment -2- by pressing slightly -arrow a-.
  • Assemble cover of battery compartment -3- and transmitter unit -arrow b-.
  • The ignition key must be synchronised now → Anchor.

Synchronizing ignition key

N57-10557
Removing and installing ignition key battery
  • Remove cover cap for lock cylinder -3- → Chapter.
  • Hold ignition key -2- on lock cylinder -1-, and press “Open” button.
  • Unlock vehicle with the ignition key -2- via lock cylinder -1- within a minute.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.