Volkswagen Golf Quiz
General body repairs, exterior

Preparing old undamaged windows for fitting

In this manual: General body repairs, exterior
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Cutting back adhesive bead

WARNING

Keep bonding surface free of dirt and grease.

Do not treat bonding surface with activator immediately after cutting back. Do not prime. Do not treat with cleaning solution.
Note
If an undamaged window is being re-used, cut back the residual adhesive sealant to 1 to 2 mm shortly before bonding it back in. Do not damage primer and ceramic coating when doing this.
The remaining material is required as a base for the new adhesive sealing material.
WARNING Exception: if bonding is performed later than one day after cutting back adhesive bead, the remaining residual material must be activated with activator.

Apply activator evenly in one stroke using applicator.

Activator must not come in contact with paint, or the paintwork will be damaged.

Drying time approx. 10 minutes
Preparing old undamaged windows for fitting

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.