General body repairs, interior

Removing and installing backrest heating element -Z7-/-Z9-

~1min read

Removing

If the backrest padding in a vehicle with seat heating is renewed, then the respective backrest heating element must also be renewed.
  • Separate backrest cover from backrest padding → Chapter.
  • Cut through wire -3- right at old seat heating element -2-.
Note The old seat heating elements remain fitted on the seat padding -1- and the new heating elements are bonded in onto the old ones.

Installing

Install in reverse order, but note the following:

  • Thread wire -3- through cable guide.
  • Align new heating elements on backrest padding. Do not pull off the protective films for this.
  • Pull protective films off heating elements one after the other. Ensure to not damage the heating elements.
  • Bond in new heating elements so that they coincide with the old ones and are free of creases.
  • Place connections of the individual heating elements on bottom of recesses.

Specified torques

→ Chapter „Assembly overview - cover and padding for backrest“
→ Chapter „Assembly overview - seat heating element“
→ Chapter „Assembly overview - front backrest“
→ Chapter „Assembly overview - front seat“
Removing and installing backrest heating element -Z7-/-Z9-

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.