Volkswagen Golf Quiz
4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Removing and installing camshaft adjuster

In this manual: 4- cylinder injection engine(1.4 1 direct inction. turbocharger)
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read
Special tools for removing and installing the camshaft adjuster of exhaust camshaft

Special tools and workshop equipment required

Support bracket -10 - 222 A-

Shackle -10 - 222 A /12-

Adapter -10 - 222 A /18-

Adapter -10 - 222 A /29-

Adapter -T40091/1-

Adapter -T40091/3-

Adapter -T40093/3-

Adapter -T40093/3-6-

Removing

Camshaft adjuster for exhaust camshaft

Note For removing the camshaft adjuster of the exhaust camshaft, you only need to detach the engine support and the lower toothed belt guard.

The bolts must be unscrewed far enough to enable this.

Then, the top part of engine support is swung away from the engine.

  • Detach engine support → Chapter.
  • Detach toothed belt from camshafts → Chapter.

Camshaft adjuster for inlet camshaft

  • Detach toothed belt from camshafts → Chapter.

Installing

Installation is carried out in the reverse order; note the following:

Note Before installing the camshaft adjuster, ensure that the guide sleeve is inserted in the camshaft.

Specified torques

→ Chapter „Assembly overview - assembly mountings“

→ Chapter „Assembly overview - poly V-belt drive“

→ Chapter „Assembly overview - toothed belt cover“

→ Chapter „Assembly overview - coolant pipes“

→ Electrical system; Rep. gr.27

Check adjustment of assembly mountings (engine and gearbox mountings) → Chapter
Removing and installing camshaft adjuster

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.