Electrical system, general information

Removing and installing cigarette lighter illumination bulb -L28-

~1min read
Note On some vehicles, the illumination is not provided by a light bulb, but by an LED (light-emitting diode), depending on the equipment level. This LED is permanently attached to the retaining sleeve and cannot be renewed separately. Retaining sleeves with a light bulb are available in different versions. On the one version, the light bulb can be replaced separately; on the other version, the light bulb cannot be replaced separately. In this case, the bulb carrier has to be replaced together with the light bulb.

Removing:

  • Remove socket → Chapter.
  • Press retaining lugs -arrows- and remove retaining sleeve together with bulb carrier.
  • Unclip bulb carrier from retaining sleeve.
Removing and installing cigarette lighter illumination bulb -L28-
  • Separate bulb carrier in areas -A- and -B-.
  • Open part -B- of bulb carrier.
Removing and installing cigarette lighter illumination bulb -L28-
  • Remove light bulb in direction of -arrow-.

Installing:

Install in reverse order of removal.

Removing and installing cigarette lighter illumination bulb -L28-

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.