Removing and installing fog light bulb -L22-/-L23-

Removing

• Turn steering to right as far as stop.

• Lever off cover -1- in wheel housing liner in direction of arrow -A-.
• Disconnect electrical connector -4-.
• Pull cap -3- off fog light housing -5-.
• Turn left fog light bulb -L22--2- in direction of arrow -B- and pull it out of fog light housing -5-.
• Pull cap -3- off left fog light bulb -L22--2-.

Installing

Install in the reverse order of removal, observing the following:

Caution Risk of damage to the headlight. Do not touch the glass part of the bulb with bare fingers. Fingers leave traces of grease on the glass bulb, which vaporise when the bulb is switched on and cause the glass bulb to cloud over. Wear, for example, clean fabric gloves when inserting bulbs. Make sure cover cap is correctly seated when installing. The ingress of water will lead to permanent damage to the headlight.

• Slide cap -3- onto left fog light bulb -L22--2-.
• Push left fog light bulb -L22--2- into fog light housing.
• Turn left fog light bulb -L22--2- clockwise to stop.
• Test functionality.
• Check headlight setting and adjust headlight if necessary → Booklet36.1