Electrical system

Removing and installing fog light, GTI and GTD

~1min read
Note Removal and installation are described for the left side. Removal and installation on the right side are carried out in the same way.

Removing

  • Switch off ignition.
  • Remove ignition key, if inserted.
  • Turn light switch to “0” position.
  • Remove wheel housing liner → General body repairs, exterior; Rep. gr.66.
  • Unscrew bolts -1- and -3-.
  • Lift fog light -4- in direction of arrow -A-.
  • Pull fog light -4- out of bumper cover.
  • Disconnect electrical connector -2-.

Installing

Install in the reverse order of removal, observing the following:

  • Adjusting fog lights → Booklet36.1

Specified torques

→ Chapter „Assembly overview - fog lights, GTI and GTD“

Removing and installing fog light, GTI and GTD

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.