Volkswagen Golf Quiz
4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Removing and installing intake manifold sender -GX9-

In this manual: 4- cylinder injection engine(1.4 1 direct inction. turbocharger)
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read
0102030405032N·mlb·ft
Tightening torque found on this page

Intake manifold sender -GX9- consists of:

Intake air temperature sensor 2 -G299-

Intake manifold pressure sender -G71-

Removing

  • Remove air filter housing → Chapter.
  • Disconnect electrical connector -1-.
  • Release fasteners -arrows-, and remove intake manifold sender -GX9-.

Installing

Installation is carried out in the reverse order; note the following:

Note

Renew O-ring.

If the retaining tabs broke off during removal, the sender can be secured using two securing bolts as per → Electronic Parts Catalogue. Specified torque: → Anchor

Torque
Removing and installing intake manifold sender -GX9-
Component Specified torque
Intake manifold sender -GX9- 3 N·m
  • Install air filter housing → Chapter.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.