Removing and installing luggage compartment light -W3-

Removing

Caution Danger of damage to component surfaces. When using leverage tools, mask visible areas of the component with commercially available adhesive tape.

• Press in locking lug -1- using a flat screwdriver and lever out luggage compartment light -W3--2-.
• Disconnect electrical connector -3-.

• If necessary, lever off heat shield -2- on both sides at arrows -A-.
• Remove heat shield -2- from glove compartment light -W3--1-.

• Press contact plate -1- of light in direction of arrow.
• Remove festoon bulb -2- from bulb holder.

Installing

Install in the reverse order of removal, observing the following:

• If present, attach heat shield to luggage compartment light.
• Insert luggage compartment light into opening and engage it on opposite side.
• Test functionality.