4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Removing and installing oil spray jets

~1min read
010203040502720N·mlb·ft
Tightening torque found on this page

Special tools and workshop equipment required

Socket -T10545-

Removing

  • Remove noise insulation → General body repairs, exterior; Rep. gr.66.
  • Remove sump upper part → Chapter.
Note The crank web of the respective cylinder must be positioned so that the socket -T10545- can be inserted in the pressure relief valve as close to vertical as possible. Furthermore, the corners of the socket -T10545- and of the pressure relief valve must engage well.
  • Turn crankshaft via vibration damper securing bolt in direction of engine rotation until the respective bolt is accessible.
  • Unscrew pressure relief valve -1- using socket -T10545-.
  • Remove oil spray jets -2-.

Installing

Risk of damage to oil spray jets caused by deformation.Do not bend oil spray jets.
Removing and installing oil spray jets
1 - Pressure relief valve - 27 N·m
2 - Oil spray jet
Installation position: align leading edge of oil spray jet arrow with machined surface of cylinder block.
  • Remove upper part of sump → Chapter.
  • Install noise insulation → General body repairs, exterior; Rep. gr.66.
Removing and installing oil spray jets

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.