Electrical system

Removing and installing parking aid control unit -J446-, left-hand drive vehicle

~1min read
Note When renewing the control unit, select Renew function for the respective control unit in Guided fault finding or Guided functions mode → Vehicle diagnostic tester.

Removing

  • Remove trim under dash panel → General body repairs, interior; Rep. gr.68.
  • Disconnect connectors -1 and 2-.
Removing and installing parking aid control unit -J446-, left-hand drive vehicle
  • To do so, press locking detent -1-, swing retainer in -direction of arrow- and pull off connector.
  • Disengage retaining tab -arrow- and remove control unit -3- downwards from retainer.

Installing

Installation is carried out in the reverse sequence.

Removing and installing parking aid control unit -J446-, left-hand drive vehicle

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.