Volkswagen Golf Quiz
Electrical system

Removing and installing parking aid control unit -J446-, RHD vehicle

In this manual: Electrical system
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read
Note When renewing the control unit, select Renew function for the respective control unit in Guided fault finding or Guided functions mode → Vehicle diagnostic tester.

Removing

  • Remove footwell cover on driver side → General body repairs, interior; Rep. gr.68.
  • Release and pull out spreader rivets -2-.
  • Remove control unit -1-.
  • Disconnect connectors -3 and 4-.
Removing and installing parking aid control unit -J446-, RHD vehicle
  • To do so, press locking detent -1-, swing retainer in -direction of arrow- and pull off connector.

Installing

Installation is carried out in the reverse sequence.
Removing and installing parking aid control unit -J446-, RHD vehicle

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.