General body repairs, exterior

Removing and installing rear tunnel cross-piece

~1min read

Special tools and workshop equipment required

Torque wrench -V.A.G 1331-
Torque wrench -V.A.G 1331-

Removing and installing rear tunnel cross-piece

Removing

  • Loosen rear underbody panel and press downwards slightly → Chapter.
  • Remove nuts -2-.
  • Remove rear tunnel cross-piece -2-.

Installing

Install in the reverse order of removal observing the following:

Specified torques

Nuts → Item

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.