General body repairs, exterior

Removing and installing rear underbody cover – petrol/diesel

~1min read
Note The removal and installation procedures may have to be modified slightly depending on engine fitted.
Removing and installing rear underbody cover – petrol/diesel
  • Loosen lock washer -3-.
  • Unclip spreader rivet -2- and remove bolt -4-.
  • Remove rear underbody panel -1-.

Installing

Install in the reverse order of removal observing the following:

Specified torques

Bolt → Item

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.