Volkswagen Golf Quiz
Heating, air conditioning

Removing and installing Sanden belt pulley

In this manual: Heating, air conditioning
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Note The pulley is sensitive to impact and should therefore be treated with extreme care. If the belt pulley overload protection has deployed, check freedom of movement of air conditioner compressor before renewing belt pulley. If air conditioner compressor cannot rotate freely it must be renewed. If the drive plate overload protection device has been triggered, the pulley can rotate with the outer section of the drive plate without the air conditioner compressor shaft and the hexagon flats attached to the drive plate (inner section of drive plate) also rotating.
  • Remove poly V-belt → Rep. gr.13.
  • Removing and installing belt pulley → Chapter.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.