Volkswagen Golf Service & Repair Manual: Removing and installing steering wheel multifunction buttons -E441-/-E440-

Special tools and workshop equipment required

Removal wedge -3409-, qty. 2

Removing and installing steering wheel multifunction buttons -E441-/-E440-

Lever -T10468-

Removal pliers -3392-

Removing

Note The multifunction buttons are bolted to the trim. The trim together with the multifunction buttons is engaged on the steering wheel. It is easier to remove the trim using two removal wedges -3409-.

Switch off ignition and all electrical consumers, and remove ignition key.
Remove airbag on driver side → General body repairs, interior; Rep. gr.69.

The trim is engaged in the multifunction steering wheel in areas indicated by the -arrows-.

Using removal wedge -3409-, release trim -1- from steering wheel in areas indicated by arrows -A- and -B-.
Using lever -T10468-, release trim -1- in area of multifunction buttons on left in steering wheel -E440--2- and multifunction buttons on right in steering wheel -E441--3-.

Using removal pliers -3392-, release trim -1- in area of multifunction buttons on left in steering wheel -E440--2- and multifunction buttons on right in steering wheel -E441--3-.
Pull trim -1- off steering wheel in areas indicated by arrows -A- and -B-.
Release and detach connectors.
Remove trim -1- together with multifunction buttons on left in steering wheel -E440--2- and multifunction buttons on right in steering wheel -E441--3-.

Installing

Install in the reverse order of removal. When doing this, note the following:

Note

Removing and installing steering wheel multifunction buttons -E441-/-E440-