Volkswagen Golf Quiz
Wheels and Tyres Guide - General Information

Removing and installing valve, metal valve

In this manual: Wheels and Tyres Guide - General Information
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Special tools and workshop equipment required

Torque wrench -V.A.G 1410-

Carry out the following work:

Removing

  • Remove tyre pressure sensor → Chapter.
Removing and installing valve, metal valve
  • Remove nut -1- from metal valve.
  • Counterhold on metal valve (for example using 2 mm twist drill) -arrow-.

Installing

Caution Tighten nut for metal valve to specified torque. Retightening is impermissible, as the seal may otherwise be damaged.
Removing and installing valve, metal valve
  • Tighten nut -1- of metal valve.
  • Counterhold on metal valve (for example using 2 mm twist drill) -arrow-.
  • Install tyre pressure sensor → Chapter.

Specified torques

→ Chapter „Assembly overview - tyre pressure sensor, tyre pressure sensor without valve“
Removing and installing valve, metal valve

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.