Volkswagen Golf Quiz
General body repairs, exterior

Removing and installing window slot outer seal

In this manual: General body repairs, exterior
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read
Note
  • The core of the window slot outer seal is a metal insert.
  • If it is bent or distorted, the window slot outer seal cannot be straightened out anymore. It will remain “wavy”.
  • Therefore, the window slot outer seal must be pulled off and pressed on evenly, without bending or distorting it.
  • Removal and installation are only described for the left window slot outer seal. Removal and installation of the right window slot outer seal are similar.
Removing and installing window slot outer seal

Removing

  • Pull window slot outer seal -1- uniformly off door flange -2--arrows a-. Make sure not to bend the side strip.

Installing

Note
  • The use of assembly aid is allowed.
  • The use of striking tools is not allowed for installing window slot outer seal.
  • Align window slot outer seal -1- with B-pillar and press it uniformly and by hand onto door flange-2-.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.