Volkswagen Golf Quiz
General information, paint

Wax-based underseal -D 316 000 A1

In this manual: General information, paint
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~2min read
1special tools

Designation:

Wax-based underseal -D 316 000 A1-

Issued 01.2008

Product description

Wax underseal -D 316 000 A1- offers excellent long-term underbody corrosion protection. Wax underseal is based on a solvent-free, oxidative-drying system and offers excellent underbody corrosion protection. This corrosion protection is the result of very good adhesion to metal surfaces at both very low and high temperatures.

The product creates a light-brown, elastic coating which is firm to the touch.

It is not necessary to raise the temperature to produce a film coating.

Technical data sheet, wax underseal -D 316 000 A1-

Application

The material is used primarily in automotive applications.

Ensure that the substrates are dry.

The ready-to-use product is applied by brush at a material temperature between 20 and 35 °C. When required by the application method, the material can be gently heated to maximum 45 °C directly () before application. The oxidative curing product may already develop a skin on the surface after only a short time. This has no influence on its anti-corrosion protection or other properties

Properties

Solvent-free

Active ingredient content: 100%

Excellent long-term anti-corrosion protection

Good adhesion

Low tendency to drip

Low-temperature flexibility

Long storage life

Note Before using, read the safety measures and recommendations in the safety data sheet. Even for products which are not required by law to be labelled, the usual safety measures for chemical products must be observed.

Application

The surfaces to be treated must be dry and free of grease or dust.

Bring wax-based underseal to application temperature (20-35 °C).

Apply material to body parts which are to be protected and spread with a brush.

Technical data
Base Mixture of anti-corrosion additives on sulfonate basis, alkyd resin, special mineral oil raffinates, pigments, thickeners, drying accelerators and fluorescent pigments.
Form and colour as supplied light-brown, viscous liquid
Rheomat viscosity 1850 ± 350 mPas (PP50 system, d= 760 1/s)
Density at 15 °C DIN EN ISO 12185 0.995 ± 0.015 g/ml
Solids content 99 ± 1 %
Flashpoint DIN EN ISO 2719 Approx. 150 °C
Recommended coat thicknesses 100-400 µm
Working temperature +20 °C to +35 °C
Storage Approx. 12 months at temperatures between +10 °C and 30 °C
Container 310 ml

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.