Volkswagen Polo Quiz
Whels, Tires, Whel Alignment

Light Alloy Wheels, Preparing

In this manual: Whels, Tires, Whel Alignment
General Paint Information — 128Towing Guide — 10Whels, Tires, Whel Alignment — 126Battery, Starter, Generator, Cruise Control — 65Windshield Wiper/ Washer System — 9Exterior Lights, Switches — 1Interior Lights, Switches — 7Wiring — 51Refrrigerant R134a Servicing — 134
~1min read

WARNING

Do not repair damaged rims by heating, welding or adding or removing material.

Do not repair damaged or deformed rims or rims with cracked or deformed bolt holes.

Only prepare wheels with tested and specified original paint materials.

No warranty claims can be made against the manufacturer after preparing rims.
Do not repair rims that have cracks forming on the edges. Replace them immediately. Cutting work, application of heat and welding applications of any kind are not permitted.

Reshaping material is not permitted.

The true running and axial run-out deviations before preparation must not exceed the manufacturing tolerance of 0.8 mm. Only cast light alloy wheels may be primed. These wheels have the material identification AlSi xx on the inside.

Forged wheels may only be painted.

Preparation is limited to the painted surfaces.

Wheels that have been worn smooth that only have a clear coat may not be repaired.

Only surface damage on the visible side of the wheel may be prepared.

Damage must not be more than 1 mm deep.

Up to 50 mm of the rim flange may be removed and filled.

Test yourself

A quick Volkswagen Polo quiz: every answer comes with an explanation and a link to the manual page.