Volkswagen Polo Quiz
Lights and vision

Turn signal and main beam lever

In this manual: Lights and vision
Vehicle exterior — 4Vehicle interior — 8Instrument cluster — 14Before setting off — 14Opening and closing — 35Sitting correctly and safely — 46Lights and vision — 26Transporting items — 29Practical equipment — 20Starting the engine, changing gear and parking — 34Driver assist systems — 18Air conditioning system — 8At the filling station — 14In the engine compartment — 24Vehicle care and maintenance — 66Practical tips — 2In an emergency — 5Manual opening and closing — 6Vehicle toolkit — 4Hubcaps — 4Changing a wheel — 9Breakdown set — 7Fuses — 4Changing a bulb — 13Starting the engine with jump leads — 4Tow-starting and towing — 7
4steps
~24min
3/5difficulty
Done 0 of 4

Fig. 67 Turn signal and main beam lever

First read and observe the introductory information and safety warnings

Move the turn signal and main beam lever to the desired position:

  1. Right turn signal . When the ignition is switched off, right parking light .
  2. Left turn signal . When the ignition is switched off, left parking light .
  3. Switch on the main beam . When the main beam is switched on, an indicator lamp in the instrument cluster lights up.
  4. Operate headlight flasher. The headlight flasher comes on for as long as you pull the turn signal and main beam lever. The indicator lamp lights up.

Return the turn signal and main beam lever to the basic position in order to deactivate the current function.

Lane change flash

To operate the lane change flash, push the turn signal and main beam lever up or down to the point where you meet resistance and then release the lever. The turn signal flashes three times.

This function can be deactivated at a qualified workshop.

Incorrect use of turn signals, a failure to use turn signals, or forgetting to switch off a turn signal can confuse other road users. This can lead to accidents and serious injuries.
  • Always activate the turn signal in good time when changing lanes and performing overtaking or turning manoeuvres.
  • Always switch off the turn signal once the lane change or overtaking or turning manoeuvre has been completed.
Incorrect use of the main beam headlights can lead to accidents and serious injuries as the main beam headlights can distract and dazzle other road users.
The turn signal will only work when the ignition is switched on. The hazard warning lights also work when the ignition is switched off .
If one turn signal fails on the vehicle or on the trailer, the indicator lamp will start flashing twice as fast.
The main beam headlights can only be switched on if the ignition is on and the dipped beam headlights are already on.

Test yourself

A quick Volkswagen Polo quiz: every answer comes with an explanation and a link to the manual page.