Silicone Remover -LLS MAX 007-

Definition:

• Silicone Remover -LLS MAX 007-

Product Description

The Silicone Remover -LLS MAX 007- is a water-based, reduced-solvent cleaning agent that is rich in active ingredients. The raw material base has specific solvent combinations.

Properties:

• Application-oriented product-specific aerosol formulation
• Constant atomizing pressure
• Aerosol distribution
• Highest yield
• Professional painting result
• Highly effective cleaning- and degreasing agent
• Strengthens the adhesion
• Highest yield
• Even distribution

Application Instructions

Application

Recommended for:

• Parts painting and spot repair aid
• Best suited for use during the subsequent painting of Aqua Plus water-based paints

Suitable base surfaces:

• Primed, filled metal, plastic, glass, old- and factory paint surfaces, painted and unpainted base surfaces

Base Surface	Suitability
Primed, filled surfaces	+++
Factory and old paint	+++
Plastic parts	+++
Metal/glass	+++

Properties:

• Painted surfaces do not become corroded
• Removes all types of silicone, an ideal dirt and soot cleaner
• Removes cavity sealant or wax
• Removes gummy, dried-on grease residue, for example door hinges
• Removes oil and grease residue
• Ideal solvent for tar marks
• Removes adhesive residue, for example stickers

Processing

Note

• For work safety, wear appropriate, personal protective equipment:
• Breathing mask type: A2/P2
• Latex or nitrile protective gloves, for example

Application type "coat"

• Apply a light coating immediately before applying the subsequent paint layer and right away wipe dry with a clean and dry cloth.
• Do not allow the silicone remover to evaporate off the surface. Only work on small areas at the same time.
• Repeat the cleaning procedure if the surface is very dirty.
• Replace the cloths a few times. Do not use any dirty cloths.

Note

If the spray application is interrupted, make sure that the valve above the spray head is empty.

Caution

For work safety, wear appropriate, personal protective equipment.

Note the safety data sheets as well as the warnings on the label of the spray nozzle.

Dispose of the empty spray cans as recyclable material.

Characteristics

Solid content:	0 %
Yield:	Approximately 0.75 to 1.0 m² / spray can
Gloss level:	not applicable
VOC value:	620 g/L, 248 g/can

Storage

The guaranteed shelf life of 36 months from date of manufacture. Use no later than the date indicated on the label and store in original container at +20 ºC (68 ºF).