Special Tools

Special tools and workshop equipment required

• Puller - Flanged Shaft -T10037-
• Seal Installer - Flange Shaft -T10049-
• Socket And Extended Bit -T10107A-
• Torque Wrench 1331 5-50Nm -VAG1331-
• Drip Tray -VAG1306-
• Sealing Grease -G 052 128 A1-

• Press Plate -VW402-
• Press Piece - Rod -VW408A-
• Press Piece - Rod -VW411-
• Press Piece - Multiple Use -VW412-
• Press Piece - Multiple Use -30-23-
• Press Piece - Multiple Use -40-105-

• Press Piece - Multiple Use -3005-
• Press Piece - Bushing -3259-
• Press Piece - Reverse Gear Syncro -3296-
• Subframe Bushing Tool Kit -3301-
• Bearing Installer - Wheel Bearing -3345-
• 1. Puller - Kukko Internal - 46-56mm -21/7-
• 2. Puller - Kukko Puller - 60-150mm Width, 200mm Length -18/1-
• 3. Puller - Kukko Quick Action Separating Tool - 12-75mm -17/1-
• 4. Puller - Kukko Counterstay -22/2-

• Press Plate -VW401-
• Press Plate -VW402-
• Press Piece - Rod -VW407-
• Press Piece - Multiple Use -VW412-
• Press Piece - Multiple Use -VW454-
• Press Piece - Multiple Use -VW455-

• Support Channels -VW457-
• Press Piece - Reverse Gear Syncro -3296-
• Gearbox Support -T10108-
• Gearbox Support -T10108/1-
• Puller - Taper Roller Bearing -VAG1582- with a short sleeve
• Puller - Taper Roller Bearing - Adapter 13 -VAG1582/13-
• Torque Wrench 1601 -VAG1601-

• Slide Hammer Set -VW771-
• Hex Ball Socket -3247-
• Holding Fixture - Spacers -VW540/1B-
• Drip Tray -VAG1306-
• Sealing Grease -G 052 128 A1-

• Transmission Support -VW353-
• Measuring Set - Magnetic Plate - 50mm -VW 385/17-
• Dial Gauge Holder -VW387-
• Press Plate -VW402-
• Press Piece - Rod -VW408A-
• Press Piece - Multiple Use -3005-

• Press Piece - Bushing -3259-
• Bearing Installer - Wheel Bearing -3345-
• Torque Wrench 1331 5-50Nm -VAG1331-
• -1-Puller - Kukko Internal - 46-56mm -21/7-
• -4-Puller - Kukko Counterstay -22/2-

• Seal Installer - Crankshaft -VW204B-
• Puller - Flanged Shaft -T10037-
• Torque Wrench 1331 5-50Nm -VAG1331-
• Long Hex Socket -VAG1669-

• Holding Fixture -VW313-
• Press Piece - 42mm -VW516-
• Press Piece - Multiple Use -40-105-
• Seal Installer - Flange Shaft -T10049-
• Gearbox Support -T10108-
• Gearbox Support -T10108/1-

• Press Piece - Bushing -3259-
• Press Piece - Reverse Gear Syncro -3296-
• Bearing Installer - Wheel Bearing -3345-
• Puller - Taper Roller Bearing -VAG1582-
• Puller - Taper Roller Bearing - Adapter 6A -VAG1582/6A-
• -1-Puller - Kukko Internal - 46-56mm -21/7-
• -2-Puller - Kukko Puller - 60-150mm Width, 200mm Length -18/1-
• -3-Puller - Kukko Quick Action Separating Tool - 12-75mm -17/1-
• -4-Puller - Kukko Counterstay -22/2-

• Puller - Taper Roller Bearing -VAG1582- with a short sleeve
• Puller - Taper Roller Bearing - Adapter 6 -VAG1582/6- or Puller - Taper Roller Bearing - Adapter 6A -VAG1582/6A-
• -1-Puller - Kukko 2-Arm - 70-180mm -20/10-
• Puller - Taper Roller Bearing - Adapter 13 -VAG1582/13-
• Torque Wrench 1601 -VAG1601-
• Three-Arm Puller -45/2-

• Press Piece - Multiple Use -VW412-
• Press Piece - Multiple Use -VW454-
• Press Piece - Multiple Use -VW455-
• Press Plate -VW401-
• or Press Plate -VW402-
• Two M8 x 30 mm stud bolts or Guide Pins - M8 -T10273-
• Not needed: Pin -VW460/2-

• Slide Hammer Set -VW771-
• Slide Hammer Set - Hook -VW771/37-
• Seal Installer - Flange Shaft -3305-
• Torque Wrench 1331 5-50Nm -VAG1331-
• Torque Wrench 1332 40-200Nm -VAG1332-
• Sealing Grease -G 052 128 A1-
• Seal Installer - Bevel Box -T10243-

• Two M8 x 30 mm stud bolts or Guide Pins - M8 -T10273-

• Seal Installer - Bevel Box -T10298-

• Thrust Piece -T10546-

• Thrust Piece -T10547-

• Thrust Piece -T10548-

• Puller - Crankshaft/Power Steering Seal - Component 2 -T20143/2-

• Socket AF 34 mm -T50019-
• Sealing Grease -G 052 128 A1-

• Torque Wrench 1410 -VAG1410-

• Used Oil Collection and Extraction Unit -VAG1782-

• Dial Indicator -VAS6080A-
• Drip Tray -VAG1306-

• or Shop Crane - Drip Tray -VAS6208-

• It is necessary to use the Oil Filler - Adapter 6 -VAS6262/6- on some oil containers.

• Charging Device For Haldex Coupling 2 -VAS6291A-

• Charging Device For Haldex Coupling 2 - Adapter 3 -VAS6291/3-

• Inductive Heater -VAS6414-

• Digital Thermometer -VAS6519-

• Flexible Funnel -VAS6675-

• Seal Installer - Crankshaft -VW204B-

• Dial Gauge Holder -VW387-

• Press Piece - Multiple Use -VW412-

• Press Piece - Bushing -VW434-

• Press Piece - Multiple Use -VW473-

• Only for seal in pinion housing.

• Press Piece - Reverse Gear Syncro -3296-
• Drip Tray -VAG1306-
• or Shop Crane - Drip Tray - VAS6208-
• Sealing Grease -G 052 128 A1-
• 2 M10 x 30 bolts
• 4 M12 x 10 nuts
• Slide Hammer Set - Hook -VW771/37-

• Seal Installer - Crankshaft -VW204B-

• Dial Gauge Holder -VW387-
• Drip Tray -VAG1306-
• or Shop Crane - Drip Tray -VAS6208-
• 2 M10 x 30 bolts
• 4 M12 x 10 nuts
• Sealing Grease -G 052 128 A1-

• Puller - Kukko 2-Arm w/Side Clamp, 100mm Width, 100mm Length -204/2-

• -1-Internal Extractor, for example Puller - Kukko Internal - 28-37mm -21/5-

• Press Piece - Multiple Use -40-105-