Wind Deflector, Removing and Installing

Removing

• Open the glass sunroof panel all the way forward.
• Unclip the clips -3- using a screwdriver from the mounting bracket -2- for the wind deflector -1- .

• Unclip the mounting bracket -2- for the wind deflector -1- using a screwdriver.

• Remove the screws -2- on the wind deflector -1- .
• Remove the wind deflector -1- upward.

Installing

Install in reverse order of removal.

Tightening Specification

Wind deflector screws 2 N·m

Note

• The wind deflector bracket must audibly engage.
• Always replace the brake clips after it has been disassembled.

Wind Deflector Bearing, Removing and Installing

Removing

• Remove the wind deflector
• Remove the mounting pin -3- from the upper screen frame -2- and the wind deflector bearing -1- .

• Remove the wind deflector bearing -1- in the direction of the -arrow- from the upper screen frame -5- .
• Remove the tension wire -2- from the lower screen frame -4- and remove the screen -3- .

Installing

• Slide the tension wire -3- carefully through the net -2- and all the way into the lower screen frame -4-.

Installation is performed in reverse order of the removal.

Use a new mounting pin to secure the wind deflector bearing.

• Install the wind deflector.

Automatic Rotary Switch for Glass Sunroof Panel and Sun Shade, Removing and Installing

• Remove the automatic rotary switch for the glass panel of the panorama sunroof.