Installing the seats in the second row of seats

Fig. 94 Installing the seat: bolts Ⓐ, locking levers Ⓑ and retaining bars Ⓒ.

Fig. 95 Convenience position: vehicles with 4 seats

First read and observe the introductory information and safety warnings

Fitting the seat

• Place the seat with the retaining bars on the bolts Ⓐ.

• Pull both locking levers in the direction of the arrow .

• Pull the seat upwards to check that the catches are securely engaged .

• Pull the loop on the side of the seat and fold the backrest back until it clicks into place.

• OR: Pull the loop on the back of the seat in the direction of the arrow and fold the backrest back until it clicks into place.

• Adjust the head restraint .

If the middle seat of the second row of seats has been removed, you can move the two outer seats in towards the vehicle centre by using anchoring points one step closer to the vehicle centre.

The seat is heavy and can cause serious injuries due to its weight.

• Before removing, please consider whether you can actually lift it.

Injuries could be caused if the seats are folded backwards carelessly.

• Always keep hands, fingers, feet or other body parts away from the seat area when folding the seat backwards.

A seat that has not been secured properly could become loose in an accident.

• After installing the seat, pull it upwards to check that the catches are securely engaged.