Net partition

Fig. 100 A: Folding out the net partition ①, ② B: Folding back the net partition ③, ④

Fig. 101 A. Net partition installed behind the second row of seats B: Net partition installed behind the front seats

First read and observe the introductory information and safety warnings

The net partition can prevent objects in the luggage compartment entering the passenger compartment.

The net partition needs to be removed from the bag and rolled out before fitting.

Folding out the net partition

Fold out the net partition side rods A and ② A in the direction of the arrow until you hear it click.

Fitting the net partition behind the second row of seats

• Fold the outer seats on the second row of seats forwards .

• Hook the net partition into the rear left-hand holder in the roof A. Make sure that the side rod is pulled up over the anchoring points so that it latches securely in the slots.

• Fit the net partition into the rear right-hand holder in the roof by pushing the rod together.

• Secure the net partition with the clips A on both retaining rings on the floor.

• Fold the outer seats on the second row of seats back .

Fitting the net partition behind the front seats

• Remove the seats on the second row of seats .

• Hook the net partition into the front left-hand holder in the roof B. Make sure that the side rod is pulled up over the anchoring points so that it latches securely in the slots.

• Fit the net partition into the front right-hand holder in the roof by pushing the rod together.

• Secure the net partition with the clips B on both retaining rings on the floor.

Removing the net partition

• Loosen the net partition straps.

• Unhook the net partition securing hooks from retaining rings A or Ⓓ B.

• Detach the net partition from the right-hand holder in the roof A or Ⓒ B by pushing the rod together.

• Unhook the net partition from the left-hand holder in the roof.

Folding in the net partition

• Press the release button B. With the release button pressed down, fold in the rod in the direction of the arrow.

• Press the release button B. With the release button pressed down, fold in the rod in the direction of the arrow.

• Roll up the net partition and store in the bag.

• Stow the net partition securely in the vehicle.

In the event of a sudden driving or braking manoeuvre or accident, loose objects could be flung though the vehicle and cause severe injuries.

• Ensure that the rods are securely engaged.

• Objects should be secured even when the net partition is correctly fitted.

• While the vehicle is moving, no passengers may travel behind the fitted net partition.