Heating, Ventilation and Air Conditioning
Receiver/Dryer
In this manual: Heating, Ventilation and Air Conditioning
~2min read
|
The receiver/dryer collects the fluid drops and then directs them in an uninterrupted stream to the expansion valve. Moisture which has entered the refrigerant circuit during repairs will be collected by the dryer bag in the receiver/dryer. Note Replace the receiver/dryer if refrigerant circuit has been open for a long time (beyond the normal repair time) and moisture has penetrated inside, or if required due to a specific complaint. Refer to → Chapter "Components, Replacing". Only remove sealing plugs shortly before installation.A dryer bag in an unsealed receiver/dryer is saturated with moisture after a short period of time and unusable.When installing, note arrow for direction of flow if necessary. |
![]() |
The new generation of receivers/dryers are installed directly on the condenser and contain a dryer cartridge. Note Replace the dryer cartridge if refrigerant circuit has been open for a long time (beyond the normal repair time) and moisture has penetrated inside, or if required due to a specific complaint. Refer to → Chapter "Components, Replacing". Remove dryer cartridge from packaging shortly before installation.The dryer cartridge becomes saturated with moisture and unusable after a short time in an unsealed package. |
![]() |
Test yourself
A quick Volkswagen Touran quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
Caution Non-approved tools or materials such as leak sealing additives can cause damage or malfunctions in the system.
Note Replace the receiver/dryer if refrigerant circuit has been open for a long time (beyond the normal repair time) and moisture has penetrated inside, or if required due to a specific complaint. Refer to → Chapter "Components, Replacing". 
