Heating, Ventilation and Air Conditioning
A/C Compressor without Magnetic Clutch
In this manual: Heating, Ventilation and Air Conditioning
~2min read
|
The engine drives the A/C compressor via a ribbed belt.Overload protection (shear) installed in the A/C compressor ribbed belt pulley releases when the compressor stops and protects the ribbed belt pulley from being overloaded. The A/C compressor extracts the refrigerant gas from the evaporator, compresses it and relays it to the condenser. Note The A/C compressor contains refrigerant oil, which can be mixed with refrigerant R134a under any temperature. The type plate lists the type of refrigerant required for the A/C compressor. A regulator valve regulates pressure within the specified range (control characteristics) on the low pressure side. On this A/C compressor, the control valve is activated from outside.The engine should only be started if the refrigerant circuit is completely assembled. Refer to → Chapter "Refrigerant Circuit, General Precautions". The A/C compressor is equipped with a protected oil supply, this prevents A/C compressor damage in the event that the system is empty. This means that approximately 40 to 50 cm3 of refrigerant oil remains in the A/C compressor. |
![]() |
Test yourself
A quick Volkswagen Touran quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
Caution Non-approved tools or materials such as leak sealing additives can cause damage or malfunctions in the system.
Note The A/C compressor contains refrigerant oil, which can be mixed with refrigerant R134a under any temperature. The type plate lists the type of refrigerant required for the A/C compressor. A regulator valve regulates pressure within the specified range (control characteristics) on the low pressure side. 