Volkswagen Touran Quiz
Electrical System

Special Connector Systems

In this manual: Electrical System
General Paint Information — 130Towing Guide — 4Wheel and Tire Guide Information — 111Electrical System — 104Heating, Ventilation and Air Conditioning — 106
~1min read

Note If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts. Refer to → Chapter "Secondary Lock".

Faston Contacts

Guide the release tool which fits the contact housing into release channel on contact housing.
Grasp contact at wire and push it gently into contact housing.
Note By pushing the contact in the direction of the contact housing, the contact retaining tabs are lifted off the housing shoulder and can be released using the release tool.		 Special Connector Systems
At the same time, push release tool in direction of contact housing and pull the released contact out of contact housing -arrow-.
After removing the contact, release tool can be pulled out of the contact housing again.
Special Connector Systems

GT 150/280 Contacts

Guide the release tool which fits the contact housing under retaining tab into contact housing.
Push tool into contact housing until it stops -arrow-.
Special Connector Systems

Contact is ejected from the contact housing.

After ejecting the contact, release tool can be pulled out of contact housing again.
Special Connector Systems

Contacts without Retaining Tabs

Insert release tool under retaining tab of terminal housing.
Push release tool through until it stops by gently lifting -arrow-.
Special Connector Systems

Contact is ejected from the contact housing

 Special Connector Systems

Test yourself

A quick Volkswagen Touran quiz: every answer comes with an explanation and a link to the manual page.