Self Help

Components

6steps
~36min
2/5difficulty
Done 0 of 6
Fig. 146

Schematic diagram: components
of the vehicle tool kit.

Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic

The scope of the vehicle tool kit depends on the vehicle equipment. The maximum scope is described below.

Components of the vehicle tool kit⇒ Fig. 146

  1. Screwdriver with hex socket in the handle
    for unscrewing or screwing in the loosened wheel bolts. The screwdriver blade is interchangeable. The screwdriver may be located under the wheel wrench.
  2. Adapter for the anti-theft wheel bolt.
    Volkswagen recommends always carrying the wheel bolt adapter in the vehicle with the vehicle tool kit. The code number of the wheel bolt lock is stamped on the front of the adapter. This number can be used to obtain a replacement adapter if it is lost. Note the code number of the wheel bolt lock and keep it separately from the vehicle.
  3. Screw-in towing eye.
  4. Wire bracket for removing wheel center caps,
    full wheel covers or wheel bolt covers.
  5. Jack. Before returning the jack to the tool box, fully wind back the jack's lifting claw. The crank must then be braced against the side of the jack so that the jack can be stowed securely.
  6. Wheel wrench.
Jack: maintenance

The jack is generally not subject to maintenance intervals. If necessary, lubricate the jack with universal grease.

Vehicles with natural gas engine

On vehicles with a natural gas engine that are supplied from the factory with a second set of wheels, the vehicle tool kit is stored in a separately supplied bag. Volkswagen recommends not keeping the bag in the vehicle permanently, but only when it is required for changing winter or summer tyres.