Display messages
and safety warnings first⇒
to the topic
Depending on vehicle equipment, various information can be shown in the instrument cluster display ⇒ Fig. 10② or ⇒ Fig. 11② :
- Warning and information displays
- Trip odometer displays
- Time
- Outside temperature
- Selector lever positions ⇒ Shifting
- Gear recommendation ⇒ Shifting
- Multifunction display (MFD) ⇒ Volkswagen Information System
- Service interval display ⇒ Service interval display
- Start-Stop system status display ⇒ Start-off assistance systems
- Fuel level display ⇒ Refueling
- Seat belt status display for rear seats ⇒ Seat belts
When the ignition is switched on or while driving, some vehicle functions are checked and vehicle components are monitored for their condition. Malfunctions are indicated by warning symbols in the instrument cluster display (⇒ Warning and indicator lights) and may also be signaled by an audible tone. The display may vary depending on the instrument cluster version.
Odometer displaysThe total odometer records the total distance the vehicle has traveled.
The trip odometer (trip) shows the distance driven since the trip odometer was last reset. The last digit shows 100 meters.
- Button




Briefly
press to switch between the trip odometer and the total odometer.
- Button





With the trip odometer displayed, press and hold to reset the trip odometer and, if applicable, other displays in the multifunction display to zero ⇒ Volkswagen Information System. After holding for about 5 seconds, the previous trip odometer value is restored.
- To set the time, if necessary switch to the time display by pressing the rocker ⇒ Fig. 12② up or down, or the adjustment button ⇒ Fig. 11⑥.
- Button



Press and hold to highlight the hour display so that it flashes.
- To advance the time, press the button





press. Hold down for fast advance.
- Button



Briefly press again to switch to the minute display so that it flashes.
- To advance the time, press the button





press. Hold down for fast advance.
- Button



Press again to complete the clock setting.
At outside temperatures colder than +4 °C, a snowflake/ice crystal symbol also appears in the outside temperature display
.
This symbol remains lit until the outside temperature rises above +6 °C ⇒
.
When the vehicle is stationary or traveling at very low speed, the displayed temperature may be slightly higher than the actual outside temperature due to heat radiated from the engine.
The measuring range is -45 °C (-49 °F) to +76 °C.
Selector lever positionsThe selected selector lever position is shown by illuminated letters on the selector lever. In position D, the instrument cluster display shows the gear engaged in the transmission and the current driving range. In position
(Tiptronic), only the selected
gear is shown ⇒ Shifting.
While driving, the instrument cluster display may show a recommendation to select a fuel-saving gear ⇒ Shifting.
Seat belt status display for the rear seatsWhen the ignition is switched on, the seat belt status display in the instrument cluster display shows the driver whether possible passengers in the rear seats have fastened their seat belts ⇒ Seat belts.
Start-stop system status displayThe instrument cluster display shows information about the current status ⇒ Start-off assistance systems.
Ignoring illuminated warning lights can lead to breakdowns in traffic, accidents and serious injuries.
- Never ignore warning lights that are illuminated.
- Stop the vehicle as soon as it is possible and safe to do so.
- A broken-down vehicle presents a high accident risk for the occupants of your own vehicle and for other road users. If necessary, switch on the hazard warning lights and set up the warning triangle to warn other road users.
- Park the vehicle at a safe distance from flowing traffic so that no parts of the exhaust system come into contact with easily ignitable materials underneath the vehicle, e.g. dry grass, fuel.
Roads and bridges may be icy at outside temperatures above freezing point.
- The ice crystal symbol indicates a possible risk of black ice.
- Black ice can also be present at outside temperatures above +4 °C when the ice crystal symbol is not displayed.
- Never rely solely on the outside temperature display!
Ignoring illuminated indicator lights can lead to damage to the vehicle.

There are different instrument clusters, so the designs and displays may vary.

If several warning messages are present, the symbols appear one after another for a few seconds. The symbols continue to appear until the cause has been eliminated.