Self Help
Replacing blown fuses
In this manual: Self Help
~1min read
Fig. 159Blown fuse.
Fig. 160Pull out or insert the fuse with the plastic pliers
①.
and safety warnings first⇒
to Preparations
- Switch off the ignition, the lights and all electrical consumers.
- Open the corresponding fuse box ⇒ Fuses in the vehicle.
- Shine a flashlight on the fuse. This makes a blown fuse easier to identify.
- A blown fuse can be identified by the melted metal strip ⇒ Fig. 159.
On the back of the fuse box under the instrument panel, near the diagnostic connector, there is a plastic pliers tool for removing fuses.
- Remove the plastic pliers ⇒ Fig. 160① from the holder.
- For small fuses, slide the clip ⇒ Fig. 160① on from above ⇒ Fig. 160
.
- For larger fuses, slide the clip ⇒ Fig. 160① sideways onto the fuse ⇒ Fig. 160
.
- Pull out the fuse.
- If the fuse is blown, replace it with a new fuse of the same rating (same color and same marking) and same size ⇒
.
- Return the plastic pliers to the holder behind the fuse box under the instrument panel.
- Reinstall the cover or close the fuse box lid.
If a fuse is replaced with a higher-rated fuse, damage may occur elsewhere in the electrical system.
Was this page helpful?