Stored information in the control units
and safety warnings first⇒
to the topic
The vehicle is equipped at the factory with electronic control units that handle, among other things, engine and transmission control. The control units also monitor the function of the exhaust system and the airbags.
To do this, the electronic control units continuously evaluate vehicle-relevant data while driving. If faults or deviations from the target values occur, only this data is stored. Faults are generally indicated by the warning lamps in the instrument cluster.
Data stored in the control units can only be read and evaluated with special equipment.
Only by storing the relevant data can a qualified workshop identify and rectify faults that have occurred. The stored data may include, among other things, the following:
- engine- and transmission-related data
- Speed
- direction of travel
- braking force
- seat belt status
Under no circumstances do the installed control units record conversations inside the vehicle. Movement profiles of routes driven can neither be created from the stored data nor are they permitted to be created.
When the vehicle is used, situations are conceivable in which the stored data, alone or in combination with other information (accident report, damage to the vehicle, witness statements, etc.), could be linked to a person, possibly with the involvement of an expert and with the help of that expert's additional information.
On vehicles with an emergency call function via the mobile phone or other connected devices, the current location can be transmitted. In accidents in which control units register an airbag deployment, the system can automatically send a transmission signal. This depends on the service provider. In principle, transmission only works in areas with sufficient mobile network coverage.
Additional functions agreed with the customer by contract, e.g. vehicle location in an emergency, allow certain vehicle data to be transmitted from the vehicle.
Event Data Recorder (crash data storage)The vehicle is not equipped with an accident data recorder.
An accident data recorder temporarily stores vehicle information. This provides detailed findings about the course of an accident. On vehicles with an airbag system, for example, accident-relevant data such as impact speed, seat belt buckle status, seat positions and deployment times can be stored. The scope of the data depends on the respective manufacturer.
An accident data recorder may only be installed with the owner's consent and is legally regulated in some countries.
Reprogramming control unitsIn principle, all data for controlling components is stored in the control units. Some comfort functions, e.g. comfort turn signal, single-door unlocking and display indications, can be reprogrammed using special workshop equipment. If the comfort functions are reprogrammed, the corresponding information and descriptions in this owner's manual no longer match the original functions. Volkswagen recommends having the reprogramming confirmed in the service plan under other workshop entries.
The Volkswagen Partner can provide information about possible reprogramming.
Reading out the vehicle event memoryIn the vehicle interior there is a diagnostic connector for reading out event memories ⇒
. The
event memory stores data on the function and status of the electronic control units. Further information about the stored data is available from a qualified workshop.
Depending on the vehicle model and version, the diagnostic connector may be located in the footwell on the driver's side, on the underside of the instrument panel, or next to the engine hood release lever, possibly behind a cover.
Have the event memory read out and reset only by a qualified workshop.
After a fault has been rectified, the information about it is deleted from the memory. Other memory contents are continuously overwritten.
Using the diagnostic connector for purposes other than intended can cause malfunctions and, as a result, accidents and serious injuries.
- Never read out the event memory yourself via the diagnostic connector.
- Have the event memory read out via the diagnostic connector only by a qualified workshop. Volkswagen recommends the Volkswagen Partner for this.