Before driving
Securing a child seat with the seat belt
In this manual: Before driving
~1min read
and safety warnings first⇒
to the topic
If you want to use a universal (u) category child seat in your vehicle, make sure it is approved for the seat positions. The necessary information can be found on the orange ECE approval label of the child seat. Refer to the following table for installation options.
| Group | Child's weight | Front passenger seat | Rear seat bench positions |
|---|---|---|---|
| Group 0 | up to 10 kg | u | u |
| Group 0+ | up to 13 kg | u | u |
| Group 1 | 9 to 18 kg | u | u |
| Group 2 | 15 to 25 kg | u | u |
| Group 3 | 22 to 36 kg | u | u |
- Observe and follow the notes ⇒ Basic information on installing and using child seats.
- Route the seat belt according to the child seat manufacturer's instructions, or guide it through the child seat.
- Make sure the seat belt is not twisted.
- Insert the latch plate into the buckle belonging to the seat until it clicks audibly into place.
Was this page helpful?